| Module Type | ATP-120M / ATP-120P | |||
| Maximum Power(Pmax) | 360w | 365w | 370w | 375w |
| Open-circuit Voltage (Voc) | 40.5 | 40.7 | 40.9 | 41.1 |
| Optimum Operating Voltage (Vmp) | 34 | 34.2 | 34.4 | 34.6 |
| Short-circuit Current (Isc) | 11.35 | 11.43 | 11.52 | 11.60 |
| Maximum Power Current (Imp) | 10.59A | 10.68A | 10.7A | 10.84A |
| Module Efficiency (%) | 19.6~20.4% | |||
| Standard Test Environment | lrradiance 1000 W/m 2 , module temperature 25 °C, AM=1.5;Tolerances of Pmax, Voc and Isc are all within +/- 5%. | |||
| Operating Module Temperature | -40 °C to +85 °C | |||
1. High light transmittance and low iron tempered glass, through the use of excellent tempered glass and battery surface flocking technology, to achieve excellent performance in low light environments. 2. More uniform current collecting capacity, reducing current and heat loss of the battery in the module. 3. Beautiful appearance, more suitable for roof installation. 4. Anti-aging EVA, excellent weather-resistant back film. 5. Anodized high-quality aluminum alloy frame. 6.High efficiency.
[Reliable and adaptable] The corrosion-resistant aluminum frame can be used outdoors for a long time, so that the panel can be used for decades. The pre-drilled holes on the back of the solar panel allow quick installation and fixation. Compatible with different installation systems, such as Z-bracket, pole installation and tilt installation. High-quality solar panel components. [durable] 150W monocrystalline solar panels can withstand high winds (2400Pa) and snow loads (5400Pa), and the IP65-rated junction box can provide comprehensive protection against environmental particles and low-pressure water jets. The anodized aluminum frame, tempered glass and sealed junction box make the solar panel corrosion-resistant and weather-proof, with excellent outdoor performance.1. Fully comply with certification and regulatory standards. 2. Withstand wind loads up to 2.4KPa and snow loads up to 5.4Kpa. Confirm mechanical stability. Successfully withstand the highest exposure severity levels of ammonia and slat fog. Ensure its performance under adverse conditions. 3. The junction box and bypass diode ensure that the module will not overheat and hot spots.
1. High quality, ALLTOP production process, medium quality, mass quality, Japanese-style manipulative treatment, pre-packaging. 2. ALLTOP Can provide and provide hundreds of standard design. 3. Installed flight. 4. High brightness sum hardness. 5. Adhesive strength. 5. Anti-smoothness, light slip.